90cm Panoramic Induction Hob
90cm Panoramic Induction Hob
90cm Panoramic Induction Hob
90cm Panoramic Induction Hob
90cm Panoramic Induction Hob
90cm Panoramic Induction Hob
90cm Panoramic Induction Hob
90cm Panoramic Induction Hob

90cm Panoramic Induction Hob

Easy clean induction hobs
  • Fast Delivery - Pre-Wired - 2 Years Warranty
Normaler Preis£1,299.00
Total for selected quantity
/
Ex VAT: £1,082.50
inkl. MwSt. zzgl. Versandkosten

  • Auf Lager
  • Nachbestellt, bald verfügbar
This service is not currently available for the postcode entered. Please contact us to check availability.
£1,299.00

The Luxair 90cm Panoramic puts all four induction zones in a single row — no reaching over hot pans. 350mm shallow depth for island seating, shallow worktops, and narrow kitchen runs. 2 FlexZones with automatic bridging. Downdraft compatible — pairs exceptionally with the Luxair LA-90-DOWNDRAFT.

90cm Panoramic Induction Hob — All Zones in One Row. 350mm Shallow Depth. Downdraft Compatible.

A standard 90cm induction hob arranges its zones in a 2×2 grid — two at the front, two at the back. The back zones require leaning over the front burners to reach them, and the hob depth of 510mm or more can make it awkward against island seating or in shallow worktop runs. The Luxair 90cm Panoramic solves both problems by putting all four cooking zones in a single row across the 90cm width, at a depth of just 350mm.

Every zone is at the front of the hob. No pan sits behind another. No reaching over a hot burner. The 350mm depth means the hob fits into shallow base units, narrow kitchen runs, and island installations where seating starts close to the worktop edge. Engineered in Germany for precision and performance, it also pairs directly with the Luxair LA-90-DOWNDRAFT cooker hood — making it the natural hob choice for any Luxair downdraft extraction setup.

Linear layout — the ergonomic argument

The single-row linear layout isn't just aesthetic. Reaching over a live front burner to stir a pan at the back of a conventional hob is a genuine safety hazard — particularly with children nearby, or for anyone with reduced reach or mobility. The Panoramic removes this entirely: all four zones sit in line from left to right, all at the same depth from the front edge. Stirring, checking, adjusting — all done from a safe, consistent position in front of the hob. Two side-by-side FlexZones are included, each auto-detecting pan size and bridging automatically for large cookware.

350mm depth — the installation argument

At 350mm front-to-back, the Panoramic is significantly shallower than any standard 90cm induction hob. This makes it the correct choice for three specific scenarios: shallow-depth kitchen worktops where a standard hob won't fit; island installations where seating or a breakfast bar runs adjacent to the cooking surface and a 510mm hob would put pans directly above diners; and anywhere a standard hob depth feels intrusive relative to the available counter space. 7,400W total output. 9 power levels per zone. Boost function for rapid heat-up. Programmable timer, egg timer, child lock, overflow detection, control panel lock. 32amp connection required.

4 x Individual Cooking Zones in a single panoramic row

2 x FlexZone Smart Cooking Areas – Place pans anywhere within the flex zone

Automatic Pan Detection – Heats only where cookware is detected

9 Power Levels – Precise heat control

Boost Function – 5-minute rapid heat-up

Programmable Timer – Set between 1–99 minutes

Egg Timer Countdown Setting

Control Panel Lock & Child Lock – Safety for families

Overflow Detection – Prevents spills and damage

Pre-Wired for Easy Installation – 32amp connection required

Electrical Rating: 7400W

Voltage: 220–240V

Plug Type: No plug (requires electrician for connection)

  • 90cm_Panoramic_Installation_Guide.pdf

    Opens In New Window.

    Download
  • 90cm_Panoramic_Technical_Spec.pdf

    Opens In New Window.

    Download
  • 90cm_Panoramic_Wiring_Diagram.pdf

    Opens In New Window.

    Download