Luxair Replacement Aluminium Grease Filter
This is the genuine Luxair replacement aluminium grease filter for cooker hoods. Check the product title for the exact filter dimensions in millimetres before ordering — the size shown in the title is the size you will receive. Product images are for illustrative purposes only and should not be used to determine size.
Finding the Right Size
Measure your existing filter in millimetres — width first, then height. Select the closest matching size from the options available. Please note that minor variations of 1–3mm between your existing filter and the replacement are normal and will not affect fit or performance. If your existing filter measures 200mm × 300mm and the replacement is 202mm × 298mm, it will fit correctly.
If you are unsure which size is correct for your hood, use the quick-select chart on the filters category page or contact Luxair with your hood's serial number and we will confirm the correct size for you.
Fitting
When your filter arrives it may have a blue protective film around the outer edge — peel this off before fitting. It is there solely to protect the steel edges during transit and has no other function.
Cleaning and Maintenance
Aluminium grease filters should be cleaned at least once a month to maintain extraction performance. They are dishwasher-safe — place upright in the dishwasher as you would a plate. Wash at a maximum of 60°C.
Do not use abrasive cleaners, thinners, solvents, hydrochloric acid, bleach, alcohol, or alkaline detergents with a pH higher than 7 — these can permanently discolour the filter surface. Discolouration from cleaning does not affect the filter's performance in any way. After cleaning, allow the filter to dry on an absorbent surface before refitting.
Please note: grease filters are consumable items and are not covered by the Luxair product warranty.
